CTC EcoPart 400 Pro/Basic
A staged ground source heat pump for industries and larger properties with built-in control and separate hot water preparation. Available as Basic and Pro. Pro can control heating, cooling, hot water and climate systems. The pump is available in three sizes and can run alone or be connected with up to five units.
Using separate cooling modules, CTC EcoPart Pro/Basic is able to increase output in three stages. This provides gentler operation and better adaptation to the building's various output requirements. The result is fewer starts/stops and higher heating comfort compared with single-stage products. The separate cooling modules also have a very low noise level.
CTC EcoPart Pro/Basic is available in three sizes: 25, 30 and 35 kW which can be connected in series to produce up to 170 kW (1 x CTC EcoPart i435 Pro + 4 x CTC EcoPart 435).
The unique control system CTC EcoLogic Pro is integrated into CTC EcoPart Pro and monitors and controls CTC's heat pumps, solar panels, peak heat, buffer tanks, pools, cooling, etc.
CTC EcoPart Basic can be controlled with a digital signal, known as thermostat control. Furthermore, this can then be controlled by regulating the return temperature, a simple control that is ideal for accumulator charging, for example.
Thanks to an advanced refrigerant circuit and highly efficient compressors, the CTC EcoPart Pro can produce water as hot as 65 °C. This means you can have more hot water and warmer radiators. Ideal for properties with high primary flow temperatures.
Ground source, geothermal or lake heat is used as the heat source. The brine system can easily be connected to the right, left, top or rear. CTC EcoPart – a sure and obvious choice.
Model designation | Item no. |
---|---|
CTC EcoPart 425 Basic, 230V | 587001011 |
CTC EcoPart 425 Basic, 400V | 587000011 |
CTC EcoPart 430 Basic, 230V | 587001012 |
CTC EcoPart 430 Basic, 400V | 587000012 |
CTC EcoPart 435 Basic, 400V | 587000013 |
CTC EcoPart i425 Pro, 230V | 587001001 |
CTC EcoPart i425 Pro, 400V | 587000001 |
CTC EcoPart i430 Pro, 230V | 587001002 |
CTC EcoPart i430 Pro, 400V | 587000002 |
CTC EcoPart i435 Pro, 400V | 587000003 |
CTC BMS/internet
For external, online control of your property via Modbus. BMS (Building managemant system).
CTC Charge pump 25/70-130 6-8 kW
7.0 m A-class PWM for heat pump 6-8 kW. With signal and connection cables and a terminal set for connection in CTC EcoAir.
CTC Charge pump 25/75-130 10-12kW
7.5 m A-class PWM for heat pump 10-12 kW. With signal and connection cables and a terminal set for connection in CTC EcoAir.
CTC Charge pump 25/85-130 14-20 kW
8.5 m A-class PWM for heat pump 14-20 kW. With signal and connection cables and a terminal set for connection in CTC EcoAir.
CTC Converter 2.0
Enables the CTC's Series 400 heat pumps to be combined with V3 control unit.
CTC DHW button
Activates the extra hot water function, can be installed according to your preference. (15 m cable)
CTC EcoComfort
A passive cooling unit that uses the borehole's cool temperature.
CTC EcoVent 20
Exhaust Air Unit - Allows for neat and easy installation in buildings with mechanical exhaust air ventilation. The used air is vented out and new, fresh air is supplied to the building by the building's own air supply diffuser. Adapted for placement above the heatpump. Can also be placed freestanding if required.
CTC Extra Shunt Group
Complete package for neat and easy installation of additional heating circuits. Complete and ready-to-use with connected controls, which means that getting started is quick and simple. Equipped with an energy-efficient circulation pump, in accordance with the ErP Directive. Well-insulated unit with easy external access to all adjustment controls and electronic components.
CTC Förhöjningssockel II
168 mm. For more space under the heat pump. GSi/GS600, EH400 from 731020391468, EcoPart from 730120390473.
CTC Housing Cover 146 mm
Hide pipe connections, etc. with a stylish housing cover. The housing covers are available in three heights and all are combinable to fit most ceiling heights.
CTC Housing Cover 488 mm
Hide pipe connections, etc. with a stylish housing cover. The housing covers are available in three heights and all are combinable to fit most ceiling heights.
CTC Housing Cover 588 mm
Hide pipe connections, etc. with a stylish housing cover. The housing covers are available in three heights, and all are combinable to fit most ceiling heights.
CTC Mixing Valve Package Pro
Shunt valve and motor valve for installation in shunt systems (22 mm connector).
CTC Raised Base 168 mm
Base 168 mm, white lacquered. Mounted under the heat pump for more space under the product.
CTC Safety pressure switch
Provides a warning in the event of low brine pressure.
CTC SmartControl Gateway
Base unit able to control up to seven optional units.
CTC SmartControl Multi-button
Wireless 2-mode button able to control several different functions, such as additional hot water. (Base unit CTC SmartControl Gateway is required)
CTC SmartControl Repeater
Signal amplifier that amplifies signals between the base unit and the various units whenever necessary.
CTC SmartControl Room Sensor
Solar-powered wireless room sensor with rechargeable battery. (Base unit CTC SmartControl Gateway is required)
CTC SmartControl Room/Humidity Sensor
Solar-powered wireless room/humidity sensor with rechargeable battery. (Base unit CTC SmartControl Gateway is required)
CTC SmartControl Room/Humidity/CO2 sensor
Sensor that controls ventilation whenever necessary, ensures optimal ventilation for consistently good air quality, and ensures that both ventilation and energy consumption are maintained at optimal levels. (Base unit CTC SmartControl Gateway is required)
CTC Solar Pump Station
Compact solar pump station for solar heating. Used when solar panels are connected.
CTC Start-kit EcoSol
Start kit for connecting CTC solar control with existing solar system.
Communication cable 10 m
For when the control unit and heat pump are far apart (more than 5m).
Filter ball valve 1 1/2"
Ball valve with handle and dirt filter (0.6 mm) for heating/cooling system. Internal thread. DN40/Kvs 36.8
Filter ball valve 1 1/4"
Ball valve with handle and dirt filter (0.6 mm) for heating/cooling system. Internal thread. DN32/Kvs 24.7
Filter ball valve 1"
Ball valve with handle and dirt filter (0.6 mm) for heating/cooling system. Internal thread. DN25/Kvs 12.6
Filter ball valve 2"
Ball valve with handle and dirt filter (0.6 mm) for heating/cooling system. Internal thread. DN50/Kvs 62.7
Filter ball valve 3/4"
Ball valve with handle and dirt filter (0.6 mm) for heating/cooling system. Internal thread. DN20/Kvs 7.1
Mixing motor ARA671
Actuator/mixing motor ARA 671 for mixing valve group 2, 3 point. 6 nm, 230V, 4 minutes running time, without limit switch. Cable length 1.6m. Intended for valve DN 15-50.
Mixing valve DN15 KVS 2,5
Mixing valve/valve VRG131 for heat pump 7-11kW, 3-way, PN10, Kvs2,5.
Mixing valve DN25 KVS 10
3-way valve, internal thread. Temperature range -10 to + 130 ° C. Suitable actuator series ARA600.
Mixing valve DN32 KVS 16
3-way valve, internal thread. Temperature range -10 to + 130 ° C. Suitable actuator series ARA600.
Mixing valve DN40 KVS 40
3-way valve, internal thread. Temperature range -10 to + 130 ° C. Suitable actuator series ARA600.
Mixing valve DN50 KVS 50
3-way valve, internal thread. Temperature range -10 to + 130 ° C. Suitable actuator series ARA600.
Mixing valve VRB243 20-4,0
4-way bivalent mixing valve. Clamping ring clamp 22 mm. DN20. Kvs 4 m³/h.
Swing check valve 184GO-25 INV
Soft-sealing swing check valve with rubber seal in NBR. For refill rate G25 6251102.
Swing check valve 184GO-25 INV
Soft-sealing swing check valve with rubber seal in NBR. For refill rate G32 6251103.
Recommended approximate prices in SEK incl. VAT
All accessories